AMSOIL Dealer Banner

AMSOIL MOTOR OILS (10,000 miles / 6-month)

AMSOIL OE MOTOR OILS (OEM drain intervals)

Amsoil Multi-purpose Spray Grease

Synthetic Multi-Purpose Spray Grease, NLGI #2

The same great AMSOIL Synthetic Multi-Purpose Grease in a convenient spray formulation. Ideal for greasing hard-to-reach equipment such as hinges, springs and other common applications.

See Retail Pricing Information OR Request a Quote From Us

Package sizes include:

10.5-oz. Spray Can
10.5-oz. Spray Cans (case of 12)


AMSOIL GLC multi-purpose, EP grease is qualified against the highest grease standards, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple use applications. This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. GLC Grease is compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

AMSOIL's top performing lithium complex thickener system provides excellent adhesion properties and water resistance as identified by ASTM D-1264 water washout test. This resistance to water means a protective film of lubricant remains present to protect equipment against wear while the corrosion inhibitors prevent rust. AMSOIL GLC Grease adheres to metal in all types of environments and resists squeeze out during operation. These qualities ensure maximum lubricant protection during harsh operations.

AMSOIL GLC multi-purpose greases is recommended for many different applications. Its diversity simplifies lubricant inventories and prevents greasing errors while providing problem-free operation. AMSOIL GLC Grease reduces repair and maintenance costs.


  • High dropping point of 550 ° F
  • Resists thermal and oxidation degradation (lasts longer than conventional grease)
  • Excellent water-washout resistance
  • Good low temperature pumpability and torque values
  • Adhesive and shear stable to prevent squeeze out

NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments. and is the primary choice for wheel bearings.

The correct consistency grade of AMSOIL GL multi-purpose greases are recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL GL greases are suitable for use up to 350° F. When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL GL Lithium Complex Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the GL grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

Typical Technical Properties

Synthetic GL Series Spray Grease GLC
Thickener lithium complex
Fortified with moly compound no
NLGI Consistency Grade 2
NLGI Pertormance Grade GC-LB
Penetration ASIM D-217 (25 º C (77 º F), 0.1 mm)  Worked 60 strokes 265-295
Dropping Point, º F ASTM D-2265 550
High Temperature Life ASTM D-3527 160 hrs.
Oxidation Stability - ASTM D-942 1.8 psi
Water Washout-ASTM D-1264 1.6%
Rust & Corrosion- ASTM D-1743 pass
Oil Separation-ASTM D1742 24 hrs., 25 º C (77 º F), % loss 1.1
Bearing Leak Test ASTM D-1 263 6 hrs., 600 rpm, 104 º C (220 º F), g lost <1
Leakage (ASTM D-4290), g 1.0
Four Ball Wear Test ASTM D-2266 0.40
Fretting Wear (ASTM D-4170) Mg 3.4
Four Ball EP ASTM D-2596 Weld Point, kgt 400
Four Ball EP ASTM D-2596 Load Wear Index, kgf 50
Timken OK Load Test -ASTM D-2509, lbs 50
Low Temperature Torque - ASTM D-4693 N-m, -40 º C (-40 º F) 1.3
LT-37 Pumpability, 60 º F 360 g/min.
Copper Corrosion - ASTM D-4048 1B
Meets Disc Brake Wheel Bearing Specification: Ford ESA-MiC 198-A Yes
Meets Disc Brake Wheel Bearing Specification: GM6031-M Yes
Meets Disc Brake Wheel Bearing Specification: Chrysler MS-3701 Yes
Oil Viscosity 40 º C 151 cSt
Oil Viscosity 100 º CV 19.2 cSt
Flash Point - ASTM D-92 450
Fire Point - ASTM D-97 485
Color Red
Texture Smooth

AMSOIL Online Store AMSOIL Products AMSOIL FAQ's Altrum - Aggrand Products Copyright Contact Us ©2005-2012 Woods Bros. Racing Amsoil Dealer
Links Site Map Return Policy Privacy Policy Disclaimer