AMSOIL Dealer Banner

AMSOIL MOTOR OILS (10,000 miles / 6-month)

AMSOIL OE MOTOR OILS (OEM drain intervals)

Amsoil Lithium Grease

Synthetic Lithium Complex High Viscosity Grease (GVC)

AMSOIL Synthetic GVC is a lithium complex thickened grease blended with premium ISO-320 synthetic base oils.

See Retail Pricing Information OR Request a Quote From Us

Package sizes include:

14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)

GVCCR-EA Synthetic High Viscosity #2
GVCCR-CA Synthetic High Viscosity Lithium Grease
GVC35-EA High-Viscosity Lithium-Complex Synthetic Grease
GVCCR-PK Synthetic High Viscosity Lithium Complex Grease
GVC99-EA High-Viscosity Lithium-Complex Synthetic Grease

AMSOIL Synthetic GVC is a lithium complex thickened grease blended with premium ISO-320 synthetic base oils. This grease is fully compounded with additives providing EP protection, oxidation resistance and rust and corrosion protection. AMSOIL GVC is shear stable, maintaining its viscosity and consistency in the presence of mechanical activity, and GVC stays in place by resisting water washout. During high-temperature operation, GVC's thickener system remains intact and the high viscosity base oils resist thermal breakdown and provide a thick film of lubricant for good boundary lubrication. AMSOIL GVC adheres to critical components in sever conditions and provides problem-free operation, resulting in increased uptime and reduced repair and maintenance costs.

AMSOIL GVC is excellent for use in heavy duty industrial and off road applications where equipment is working under adverse conditions such as exposure to environmental elements, slow, heavily-loaded applications and shock-loading conditions. Use GVC in wet applications requiring excellent water resistance and in high temperature applications up to 350°F continuous service and 400°F intermittent service. The lithium complex thickener system and high viscosity base oil provide top performance in hostile environments and heavy duty industrial or of road applications where typical multipurpose greases may not perform up to standards.

AMSOIL GVC Lithium Complex Grease is compatible with many other types of greases. However, it is recommended that when changing greases the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the new grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Any grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Industrial for assistance.

Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Prevent over-greasing as excessive heat build up can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.


  • High dropping point (exceeds 500°F)

  • EP additives and high-viscosity base oil for boundary lubrication protection

  • Resists thermal and oxidation degradation

  • Resists water washout

AMSOIL GVC Grease is available in 14-oz. cartridges, 35-lb. pails, 120-lb. kegs and 400-lb. drums. 

AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on customer requests and regional demands.


GVC Lithium Complex High Viscosity Grease

NLGI Grade 2
Thickener, type Lithium Complex
Thickener, percent 6-9
Penetration, worked - ASTM D-217 265-295
Dropping point, °C - ASTM D-2265 274°C
Rust - ASTM D-1743 Pass
Timken #OK Load - ASTM D-2509 60
Four-Ball Extreme Pressure Weld Load, kg 315
Water Washout ASTM D-1264 @ 80°C 2.4%
Base Oil:

Viscosity (40°C, cSt)

Viscosity (100°C, cSt)



Flash Point, °C - ASTM D-92 249°C
Fire Point, °C - ASTM D-97 277°C
Texture Smooth
Color Amber/Brown
Copper Corrosion - ASTM D-4048 1B
Oil Separation (percent wt. loss) - ASTM D-1742 2 max.

AMSOIL Online Store AMSOIL Products AMSOIL FAQ's Altrum - Aggrand Products Copyright Contact Us ©2005-2012 Woods Bros. Racing Amsoil Dealer
Links Site Map Return Policy Privacy Policy Disclaimer